Simulating Bridge Construction
Moderator: SEOW Developers
Simulating Bridge Construction
Is there a way to simulate bridge construction using engineers?
-
IV/JG7_4Shades
- Posts: 2202
- Joined: Mon 08 Jan 2007 11:10 pm
- Location: Perth, Western Australia
Hi Zoi,
Only bridge repair, i.e. repair of a destroyed bridge. In SEOW bridges are part of the highway and railway networks, so a destroyed bridge blocks a transport route.
There is no way to create a new bridge in a location where there wasn't a bridge before. But you can easily set some existing bridges to destroyed status (as admin) and they will stay that way until they are repaired by engineers (if the repair by engineers setting is chosen for bridges).
Cheers,
4S
Only bridge repair, i.e. repair of a destroyed bridge. In SEOW bridges are part of the highway and railway networks, so a destroyed bridge blocks a transport route.
There is no way to create a new bridge in a location where there wasn't a bridge before. But you can easily set some existing bridges to destroyed status (as admin) and they will stay that way until they are repaired by engineers (if the repair by engineers setting is chosen for bridges).
Cheers,
4S
IV/JG7_4Shades
SEOW Developer
SEOW Developer
I was listening in while the GIAP set up there next campaign and they wanted to use unrestricted movement for ground forces. They also wanted to restrict crossing rivers some what so they decided to use the honor system and only allow crossings if engineer units were present. Keep in mind I'm not actually involved in the campaign but I did wonder if I had missed something or failed to consider all the possibilities.
Thanks for the reply 4Shades
Thanks for the reply 4Shades