Commanders interface

Da SEOW Wiki IT.
Jump to navigation Jump to search

Return to : MP user's guides

Enter in your commander interface

Dopo aver inserito username e password si passa alla videata principale della mappa.

Errore nella creazione della miniatura: Impossibile salvare la miniatura nella destinazione


Figure 4 - Sector map

Per accedere alle informazioni è necessario accedere ad una vista della mappa selezionandola dalle caselle a discesa o, se disponibile, cliccando direttamente sull'immagine generale dela mappa (Figura 2).

Una volta effettuata la scelta, viene visualizzata la vista prescelta con il posizionamento delle forze aeree e terrestri. Sono visibile anche le unità nemiche per le quali esista un livello di ricognizione. I dettagli delle informazioni appaiono in una finestra pop-up che si attiva collocando il puntatore del mouse sull'oggetto (Figura 5 e Figura 6), mentre le unità non confermate appaiono come punti di domanda. Qualora le proprie forze di terra siano in movimento, potrebbe verificarsi un ritardo di un'ora o più nell'individuazione dell'effettiva posizione. Non è un errore, ma la simulazione del ritardo delle informazioni che giungono al Quartier Generale. Le informazioni vengono fornite anche con riferimento ad aeroporti, industrie e ponti.


Errore nella creazione della miniatura: Impossibile salvare la miniatura nella destinazione


Figura 5 – Friendly Unit Display popup


Errore nella creazione della miniatura: Impossibile salvare la miniatura nella destinazione


Figura 6 - Enemy Unit Display popup


Cliccando con il tasto destro sulla mappa apparirà un menù contestuale.


Errore nella creazione della miniatura: Impossibile salvare la miniatura nella destinazione


Figura 7 – Sector drop down menu


Questo menù consente di controllare il tipo di visualizzazione accendendo o spegnendo selettivamente le icone in modo da facilitare il comandante nell'analisi dello scenario. Può essere utile a volte spegnere le proprie unità per avere una migliore percezione delle forze nemiche, o per meglio gestire taluni tipi di missioni.

  • Toggle All Unit Icons

Visualizza o nasconde tutte le unità amiche e nemiche. Può essere utile in presenza di un gran numero di oggetti se si vogliono visualizzare solo aeroporti o aree industriali.

  • Toggle Axis Unit Icons

Visualizza o nasconde tutte le unità dell'Asse, anche se sei un comandante dell'Asse.

  • Toggle Allied Unit Icons

Visualizza o nasconde tutte le unità Alleate, anche se sei un comandante Alleato.

  • Toggle Airbase Icons

Visualizza o nasconde le icone delle basi aeree.

  • Toggle Bridge Icons

Visualizza o nasconde le icone dei ponti.

  • Toggle Supply/Withdraw Icons

Visualizza o nasconde i punti di ingresso o di ritirata. Nelle nuove versioni è possibile filtrare la visualizzazione anche in ragione della categoria di oggetti terrestri(Carri armati, fanterie ecc ecc).

Supply/Withdraw Points

A supply or withdraw point is a special point on the map where:

  1. air units can be withdrawn from the sector into the reinforcement pool(when scheduling this mission it is advisable the you let these planes remain AI controlled. Depending on the type of aircraft selected the positions may show up in the airplane selection screen. You may want to place a warning in the mission briefing section (see 5.0 – Plotting an Air Mission) for this group).
  2. air units can enter to top up understrength air units as reinforcements
  3. newly created air units can enter on a rebasing mission
  4. new land or sea units enter the game

Each unit type has its own supply and withdraw points. You cannot withdraw or create air units at a sea point.

Reinforcements

Reinforcements are made available by the administrator for this battle. Numbers and types of reinforcements are currently only available by request to the administrator. Future releases of Scorched Earth may contain the capability to receive automatic reinforcements.

On the left side of the screen is the Reinforcements button. If reinforcements are available the button will be lit and read the number of types of reinforcements you have available. In the below example you have 5 different reinforcement types available.

Errore nella creazione della miniatura: Impossibile salvare la miniatura nella destinazione


Figure 8 - Mission HQ Area

Click Reinforcement Types button and three buttons will appear below the reinforcement button. The choices are Naval, Land or Air. Select the type of reinforcement. Again only units made available by the administrator are available.

If selecting either Naval or Land you are now presented with a drop down list detailing the unit(s) available. Select the unit you wish to bring into play. Next select the unit size you wish to deploy 1-4. Finally select the supply point from which the unit will enter the game. Finally click on the Commit button. The unit will now appear on the supply point on the map interface to the right. You will now have to plot the units movement on the map interface. To complete this mission scheduling see 6.0 – Plotting a Land Mission.

When bringing in air units you have a couple of choices. You can top up depleted units with 1-3 aircraft of the same make, model and year. These replacement aircraft can be piloted if that make, model year are flyable within the game. The plots for these aircraft are direct from the supply point to the home airbase of the unit being topped up. These are air start missions, no takeoffs. The number available and the supply point are shown in the selection window. Check the box in the bottom right hand corner, next to the supply point name, to create a top-up mission. At this point the mission should be shown on the map interface. You can select multiple unit top-ups by selecting multiple checkboxes. If you are satisfied with your decision, click on the commit button. Also no briefings may be entered for this mission type. An automated briefing is generated by SE.

Errore nella creazione della miniatura: Impossibile salvare la miniatura nella destinazione


Figure 9 - Air Unit Top-ups

To create new air unit click on the New Unit button. Three drop downs now appear. The first one is Commission Unit From. This drop down lists all your air supply points if any remain in your control. Air reinforcements are restricted by the administrator to specific air supply points. Once a source supply point is selected then make a choice from the Initial Deployment Locations. All airfields, friendly and enemy, are displayed in the list. Ensure that you choose an airfield under control of your forces for the destination. Finally select Unit Affiliation Details. In this drop down it lists all the air units available for deployment. Once you are satisfied with your choices, click the commit button. The mission is generated and an automated briefing is created. Depending on the type of aircraft chosen this can be a flyable mission, but you can force it to be AI only by selecting the “secret flight” option

Errore nella creazione della miniatura: Impossibile salvare la miniatura nella destinazione


Figure 10 - Create New Air Unit

Withdrawals

To withdraw a unit from the sector plot a mission, or a series of missions in the case of land units, where the final waypoint is a valid withdraw point for the type of unit. For instance you can only withdraw air unit on air withdraw points. If you are creating an air withdraw mission I recommend that it be flown by AI only. I like to put a warning the briefing for this type of mission to notify the players not to pilot these planes. Using the secrecy option will ensure that no humans can pilot this flight.

Once a unit has been withdrawn it becomes available reinforcements. Air units may have to wait for the requisite rearming period before becoming available in the reinforcement pool. Naval and land units become available immediately.

Refueling and Rearming

Air units require rearming and refueling after every mission is flown. This time is variable between aircraft. While in this state the planes are not able to perform any missions. Keep this in mind when committing aircraft to missions. Refer to Appendix A – Axis Aircraft Data or Appendix B – Allied Aircraft Data for details on specific aircraft.

Plotting a Mission – General

To schedule a mission select the Create New button on the left hand side of the screen. Three drop down windows will now appear over the next few steps. The first drop down allows you to select the unit for which you want to schedule a mission. Not all units are available at all times due to rearming, refueling and intelligence delays. Ground units take at least 1 mission after they have completed moving before they are again available for selection. Air units can take 1-4 hours before being available again. Now select the unit. The unit will now have a thick black outline on the map. If you are sure this is the unit you want, proceed. If not then select again from the dropdown window. If the unit you want to select is not available in the dropdown or no units are available then there are 2 possibilities. One is the unit you want to select is not in the currently displayed sector or district. Only units based or stopped in the sector map displayed on the right are available in the dropdown. If you want to see all units available click on the change hyperlink in just below the objectives briefing in the top left hand sector. This will return you to the sector selection screen. The other possibility is if you are already in view entire sector mode is that you have no available units this hour. If units will be available in 1 hour or more they are not selectable until the time they become available. You cannot plan missions until the squadron is rearmed or the land/sea unit has stopped moving for an hour.

The next drop down now appears. It allows you to select the number of aircraft/tanks/ships in this mission. The number will be from 1-4 depending on the number of vehicles, aircraft or ships either assigned to or remaining in that unit.

  • Special Note Regarding Recon Missions

If you are planning this mission as a recon mission only 1 plane is allowed, per flight, for a recon mission and it is an AI only plane. You can have multiple recon missions if you like but only 1 plane from each unit is allowed and no other planes from that unit can participate in until the unit has been rearmed after the recon mission has been flown, regardless as to the success of the mission. In other words if you have 4 B-25’s in a unit and you want to fly a recon mission only 1 B-25 can take part. The other 3 are grounded and not able to fly. After the recon mission has completed all 4 B-25’s (assuming the recon plane returned, if not then the 3 remaining) now have to refuel and rearm.

  • Using fewer than 4 Aircraft

If you select fewer than 4 aircraft for a mission, assuming you have 4 aircraft in the unit, results the fourth aircraft being unavailable until it has been refueled and re-armed. This will ground the unused aircraft for the same length of time as if it actually flew the mission. Naval and ground units are not affected by this restriction as they always move as a group.

The next drop down will now allow you to schedule the mission time. If you want the mission to be scheduled for the next time you generate a mission select Immediate Launch. Further choices are available to delay the launch up to 24 hours.

To complete your mission planning see either 5.0 – Plotting an Air Mission or 6.0 – Plotting a Land Mission