Hello,
Could I ask a question about mapping roads?
I am a little uncertain on what is required.
the instructions say about having a vechicle drive the route to an intersection.
Does this mean that for a road layout (as per my crude design below) I would plot a truck moving from point 1 to point 2, then another truck moving from point 2 to point 4. A truck from point 2 to point 3 and fourth truck moving from point 2 to point 5.
For those trucks starting and ending at point 2, do they have to be exactly on top of each other?
(Please ignore dots, they were needed to space the plan out)
....................,----------------------3
.................../
1-------------2----------------4
................./
.............../
.............5
I hope my question is clear.
many thanks
DD_Friar
mapping road layout
Moderator: SEOW Developers
-
IV/JG7_4Shades
- Posts: 2213
- Joined: Mon 08 Jan 2007 11:10 pm
- Location: Perth, Western Australia
Hi Friar,
Assuming that points 1,3,4,5 are either other intersections or road endpoints, then yes you need to do just as you say. One truck per route, where a route is defined as a stretch of road between intersections or endpoints. No route can continue through an intersection.
Next, yes, point 2 has to be captured exactly. As posted elsewhere, all IL-2 road points have coordinates that are even multiples of 100. That is good, because it means you can place your truck waypoints approximately on target, then when you postprocess the .mis file you can round the waypoint coordinates off to the nearest 100 m and you will have th exact coordinates required.
Cheers,
4Shades
Assuming that points 1,3,4,5 are either other intersections or road endpoints, then yes you need to do just as you say. One truck per route, where a route is defined as a stretch of road between intersections or endpoints. No route can continue through an intersection.
Next, yes, point 2 has to be captured exactly. As posted elsewhere, all IL-2 road points have coordinates that are even multiples of 100. That is good, because it means you can place your truck waypoints approximately on target, then when you postprocess the .mis file you can round the waypoint coordinates off to the nearest 100 m and you will have th exact coordinates required.
Cheers,
4Shades
IV/JG7_4Shades
SEOW Developer
SEOW Developer
-
22GCT_Gross
- Posts: 302
- Joined: Fri 13 Apr 2007 1:13 pm
- Location: Italy
Another way is to keep all the waypoints with SEOW_routes_tool (download section): the advantage is to build easily Highway, Bridges and Highway_Intersections tables.
It need to place first and last waypoint near the intersection. In .mis file the waypoints put manually with mouse appear like z=120 and x and y like a number xxxx.xx . The SEOW_routes_Tool transforms it in exact intersection waypoint (xxxx00.00) and z=20 like automatic input of FMB.
You can add waypoints (Z=120) if necessary (like example) when FMB is not able to follow the road (circle road for example)
Happy Christmas to SEOW community
It need to place first and last waypoint near the intersection. In .mis file the waypoints put manually with mouse appear like z=120 and x and y like a number xxxx.xx . The SEOW_routes_Tool transforms it in exact intersection waypoint (xxxx00.00) and z=20 like automatic input of FMB.
You can add waypoints (Z=120) if necessary (like example) when FMB is not able to follow the road (circle road for example)
Happy Christmas to SEOW community