Official SEOW

An Open Source community for historical flight simulation.
https://seowhq.net/seowforum/

SEDB70 update scripts

https://seowhq.net/seowforum/viewtopic.php?t=1063

Page 1 of 2

SEDB70 update scripts

Posted: Fri 24 Jan 2014 8:47 pm
by IV/JG7_4Shades
I have discontinued active support for MSAccess versions of SEDB. There have been no protests so far and this focus on MySQL will reduce development complexity. The MSAccess drivers are still available inside SEOW but will not be tested or maintained into the future.

Focusing on MySQL means that it is easy for us to issue SEDB patches because MySQL has a very convenient Data Definition Language (DDL). The MySQL DDL allows us to change the SEDB structure and content via simple SQL scripts.

I will post in this thread SEDB update scripts that people can apply to their databases as the DCS and MP versions are updated. There will be two different posts, one primarily for structure updates and one for data updates.

Cheers,
4Shades

Posted: Fri 24 Jan 2014 8:51 pm
by IV/JG7_4Shades
SEDB70 series structure updates. These will be posted in advance of the associated DCS and MP updates.

Code: Select all

#Required for DCS 7.0.2 and MP4public v7.0.2
ALTER TABLE Campaign_Settings ADD COLUMN Entrenchments INT;
UPDATE Campaign_Settings SET Entrenchments = 100;

Posted: Fri 24 Jan 2014 8:56 pm
by IV/JG7_4Shades
SEDB70 series data updates. These will be posted in advance of any associated DCS and MP updates.

Code: Select all

#Required for DCS v7.0.0 - missing Radar Controller Late
INSERT INTO `Object_Specifications` VALUES ('RadarControlChainHome_Late', '0', 'PBO', 0, 0, 0, 0, 54000, 0, 0, 0, 0, 0, 1, 0, 1, 'Human', 'air.RadarControlChainHome_Late', 'air.RadarControlChainHome_Late', 'vehicles.planes.Plane$B_29', 'vehicles.planes.Plane$B_29', 575000, 9012, 493, 575, 9100, 520, 26274, 0, 10241, 4, 10, 0, 0, 0, 1, 1, 'r', 'Radar Control Late', 'Radar Control Late', '19430901', 1, 1, NULL);
INSERT INTO `Object_Specifications_Steppe` VALUES ('RadarControlChainHome_Late', '0', 'PBO', 0, 0, 0, 0, 54000, 0, 0, 0, 0, 0, 1, 0, 1, 'Human', 'air.RadarControlChainHome_Late', 'air.RadarControlChainHome_Late', 'vehicles.planes.Plane$B_29', 'vehicles.planes.Plane$B_29', 575000, 9012, 493, 575, 9100, 520, 26274, 0, 10241, 4, 10, 0, 0, 0, 1, 1, 'r', 'Radar Control Late', 'Radar Control Late', '19430901', 1, 1, NULL);
INSERT INTO `Object_Specifications_Street` VALUES ('RadarControlChainHome_Late', '0', 'PBO', 0, 0, 0, 0, 54000, 0, 0, 0, 0, 0, 1, 0, 1, 'Human', 'air.RadarControlChainHome_Late', 'air.RadarControlChainHome_Late', 'vehicles.planes.Plane$B_29', 'vehicles.planes.Plane$B_29', 575000, 9012, 493, 575, 9100, 520, 26274, 0, 10241, 4, 10, 0, 0, 0, 1, 1, 'r', 'Radar Control Late', 'Radar Control Late', '19430901', 1, 1, NULL);
INSERT INTO `Object_Costs` VALUES ('RadarControlChainHome_Late',900);

Code: Select all

#Niobe With Beacon
UPDATE Object_Specifications SET Stationary='ships.Ship$NiobeWithBeacon', Inactive='ships.Ship$NiobeWithBeacon' WHERE Object_Type='NiobeWithBeacon';
UPDATE Object_Specifications_Steppe SET Stationary='ships.Ship$NiobeWithBeacon', Inactive='ships.Ship$NiobeWithBeacon' WHERE Object_Type='NiobeWithBeacon';
UPDATE Object_Specifications_Street SET Stationary='ships.Ship$NiobeWithBeacon', Inactive='ships.Ship$NiobeWithBeacon' WHERE Object_Type='NiobeWithBeacon';

Code: Select all

#Missing Spitfire MkXVI variants
INSERT INTO `Object_Specifications` VALUES ('SPITFIRE16E25', '0', 'PFI', '0', '0', '0', '0', '3000', '0', '0', '0', '0', '0', '1', '0', '4', 'Human', 'air.SPITFIRE16E25', 'air.SPITFIRE16E25', 'vehicles.planes.Plane$SPITFIRE16E25', 'vehicles.planes.Plane$SPITFIRE16E25', '670000', '700', '610', '760', '8400', '685', '500', '340', '13106', '1', '1', '0', '0', '0', '1', '1', 'r', 'Supermarine Spitfire MkXVIe (25lb)', 'Supermarine Spitfire MkXVIe (25lb)', '19441101', '1', '0', null);
INSERT INTO `Object_Specifications` VALUES ('SPITFIRE16ECLP25', '0', 'PFI', '0', '0', '0', '0', '3000', '0', '0', '0', '0', '0', '1', '0', '4', 'Human', 'air.SPITFIRE16ECLP25', 'air.SPITFIRE16ECLP25', 'vehicles.planes.Plane$SPITFIRE16ECLP25', 'vehicles.planes.Plane$SPITFIRE16ECLP25', '670000', '700', '610', '760', '8400', '685', '500', '340', '13106', '1', '1', '0', '0', '0', '1', '1', 'r', 'Supermarine Spitfire MkXVIe (25lb) (CW)', 'Supermarine Spitfire MkXVIe (25lb) (CW)', '19441101', '1', '0', null);
#Steppe
INSERT INTO `Object_Specifications_Steppe` VALUES ('SPITFIRE16E25', '0', 'PFI', '0', '0', '0', '0', '3000', '0', '0', '0', '0', '0', '1', '0', '4', 'Human', 'air.SPITFIRE16E25', 'air.SPITFIRE16E25', 'vehicles.planes.Plane$SPITFIRE16E25', 'vehicles.planes.Plane$SPITFIRE16E25', '670000', '700', '610', '760', '8400', '685', '500', '340', '13106', '1', '1', '0', '0', '0', '1', '1', 'r', 'Supermarine Spitfire MkXVIe (25lb)', 'Supermarine Spitfire MkXVIe (25lb)', '19441101', '1', '0', null);
INSERT INTO `Object_Specifications_Steppe` VALUES ('SPITFIRE16ECLP25', '0', 'PFI', '0', '0', '0', '0', '3000', '0', '0', '0', '0', '0', '1', '0', '4', 'Human', 'air.SPITFIRE16ECLP25', 'air.SPITFIRE16ECLP25', 'vehicles.planes.Plane$SPITFIRE16ECLP25', 'vehicles.planes.Plane$SPITFIRE16ECLP25', '670000', '700', '610', '760', '8400', '685', '500', '340', '13106', '1', '1', '0', '0', '0', '1', '1', 'r', 'Supermarine Spitfire MkXVIe (25lb) (CW)', 'Supermarine Spitfire MkXVIe (25lb) (CW)', '19441101', '1', '0', null);
#Street
INSERT INTO `Object_Specifications_Street` VALUES ('SPITFIRE16E25', '0', 'PFI', '0', '0', '0', '0', '3000', '0', '0', '0', '0', '0', '1', '0', '4', 'Human', 'air.SPITFIRE16E25', 'air.SPITFIRE16E25', 'vehicles.planes.Plane$SPITFIRE16E25', 'vehicles.planes.Plane$SPITFIRE16E25', '670000', '700', '610', '760', '8400', '685', '500', '340', '13106', '1', '1', '0', '0', '0', '1', '1', 'r', 'Supermarine Spitfire MkXVIe (25lb)', 'Supermarine Spitfire MkXVIe (25lb)', '19441101', '1', '0', null);
INSERT INTO `Object_Specifications_Street` VALUES ('SPITFIRE16ECLP25', '0', 'PFI', '0', '0', '0', '0', '3000', '0', '0', '0', '0', '0', '1', '0', '4', 'Human', 'air.SPITFIRE16ECLP25', 'air.SPITFIRE16ECLP25', 'vehicles.planes.Plane$SPITFIRE16ECLP25', 'vehicles.planes.Plane$SPITFIRE16ECLP25', '670000', '700', '610', '760', '8400', '685', '500', '340', '13106', '1', '1', '0', '0', '0', '1', '1', 'r', 'Supermarine Spitfire MkXVIe (25lb) (CW)', 'Supermarine Spitfire MkXVIe (25lb) (CW)', '19441101', '1', '0', null);
FW-190A2/3 Loadouts (updated 11 Feb 2014)

Code: Select all

DELETE FROM `AircraftLoadout` WHERE Obj_Long_Name='air.FW_190A2';
DELETE FROM `AircraftLoadout` WHERE Obj_Long_Name='air.FW_190A3';
INSERT INTO `AircraftLoadout` VALUES ('air.FW_190A2', 'u1', 'U1: 2 x MG17 + 2 x MG151/20 *', '100', '1', '0', '0');
INSERT INTO `AircraftLoadout` VALUES ('air.FW_190A2', 'u3', 'U3: U1 + Droptank + Recce Photo Pod *', '100', '1', '0', '0');
INSERT INTO `AircraftLoadout` VALUES ('air.FW_190A3', 'u1', 'U1: 2xMG 151/20 Only *', '100', '1', '0', '0');
INSERT INTO `AircraftLoadout` VALUES ('air.FW_190A3', 'u11sc250', 'U1 + 1xSC 250 *', '100', '1', '0', '0');
INSERT INTO `AircraftLoadout` VALUES ('air.FW_190A3', 'u11ab250', 'U1 + 1xAB 250 *', '100', '1', '0', '0');
INSERT INTO `AircraftLoadout` VALUES ('air.FW_190A3', 'u3', 'U3: 2xMG 17 + 2xMG 151/20 Only *', '100', '1', '0', '0');
INSERT INTO `AircraftLoadout` VALUES ('air.FW_190A3', 'u31sc250', 'U3 + 1xSC 250 *', '100', '1', '0', '0');
INSERT INTO `AircraftLoadout` VALUES ('air.FW_190A3', 'u31ab250', 'U3 + 1xAB 250 *', '100', '1', '0', '0');
INSERT INTO `AircraftLoadout` VALUES ('air.FW_190A3', 'u31sc500', 'U3 + 1xSC 500 *', '100', '1', '0', '0');
INSERT INTO `AircraftLoadout` VALUES ('air.FW_190A3', 'u31ab500', 'U3 + 1xAB 500 *', '100', '1', '0', '0');
INSERT INTO `AircraftLoadout` VALUES ('air.FW_190A3', 'u31tank', 'U3 + 1xType D Droptank *', '100', '1', '0', '0');
INSERT INTO `AircraftLoadout` VALUES ('air.FW_190A3', 'u41tank', 'U3 + Droptank + Recce Photo Pod *', '100', '1', '0', '0');

AircraftLoadout additions (for MP v7.0.22, updated 15 March 2014)

Code: Select all

# Add default loadouts for all aircraft
INSERT INTO AircraftLoadout ( Obj_Long_Name, Load_out, Description, Max_Internal_Fuel, HSFX_Loadout, Rearm_Delay, Airbase_Supply_Req )
SELECT CONCAT('air.',Object_Specifications.Object_Type),'default','Default',100,0,0,0 FROM Object_Specifications WHERE LEFT(Object_Class,1)='P' ORDER BY Object_Type;

# Add empty loadouts for all aircraft
INSERT INTO AircraftLoadout ( Obj_Long_Name, Load_out, Description, Max_Internal_Fuel, HSFX_Loadout, Rearm_Delay, Airbase_Supply_Req )
SELECT CONCAT('air.',Object_Specifications.Object_Type),'none','Empty',100,0,0,0 FROM Object_Specifications WHERE LEFT(Object_Class,1)='P' ORDER BY Object_Type;

Posted: Sat 15 Mar 2014 4:59 am
by IV/JG7_4Shades
bump, see last addition above.

Posted: Wed 19 Mar 2014 1:07 pm
by 22GCT_Gross
Hi Shades,
about last addition (and MP update to v. 7.0.23 - in particular: MP-head.js) I got this error:

Code: Select all

Error Line: 402
Error Code: 0
Error Message: Costante String senza terminazione
Error Url: http://itaseow.servegame.com/SEOW/MP4public/Italy_Africa_Greece/italy_africa_greece_sector.php

Error Line: 499
Error Code: 0
Error Message: 'SchedMission' non è definito
Error Url: http://itaseow.servegame.com/SEOW/MP4public/Italy_Africa_Greece/italy_africa_greece_sector.php

Error Line: 34
Error Code: 0
Error Message: 'NSchedMissions' non è definito
Error Url: http://itaseow.servegame.com/SEOW/MP4public/Scripts/MP-Body.js

Error Line: 532
Error Code: 0
Error Message: 'TURequest' non è definito
Error Url: http://itaseow.servegame.com/SEOW/MP4public/Italy_Africa_Greece/italy_africa_greece_sector.php
I restored the old aircraftsloadout table and it works.
However I guess I'm missing something.

Posted: Wed 19 Mar 2014 8:12 pm
by IV/JG7_4Shades
Hi Gross,

The update from 7.0.22 to 7.0.23 did not involve MP-Head.js. I will d/l your database and inspect.

Cheers,
4S

Posted: Wed 19 Mar 2014 10:56 pm
by IV/JG7_4Shades
Fixed. This bug was curious.

Your new AircraftLoadouts table had the correct "none" and "Empty" data for all aircraft, but the "default" and "Default" data was incorrect.

The Load_out field had "default" values (correct) but the Description field had the MySQL directive Default instead of the string constant "Default". This caused the problem.

The simple conversion:

Code: Select all

UPDATE AircraftLoadout SET Description='Default' WHERE Load_out='default';
fixed the problem. Your Ploesti DB at ITA-SEOW should now be working fine.

Cheers,
4S

Posted: Thu 20 Mar 2014 3:53 pm
by 22GCT_Gross
Thank you much
Let you know the table now is missing of 4 records: Empty and Default for the FW_190A2 and FW_190A3

Posted: Thu 20 Mar 2014 5:51 pm
by PA-Dore
Diego, I guess you applied the Mike sql request (FW-190A2/3 Loadouts updated 11 Feb 2014) on your database? This request deletes all records for FWA2/3 and needed be apply before the last request (AircraftLoadout additions for MP v7.0.22, updated 15 March 2014).

All is correct in my own database. You can easily add records manually

Posted: Thu 20 Mar 2014 8:33 pm
by IV/JG7_4Shades
The Fw-190 thing is my fault, sorry. The Fw-190 loadout fix had not been applied to Diego's table, so I applied it *after* fixing the other bug, and forgot to add the new records.

Cheers,
4S

Re: SEDB70 update scripts

Posted: Sun 06 Apr 2014 4:38 am
by IV/JG7_4Shades
Dore has contributed support for the new Channel Circus map. This has meant that I have released revisions to MP and SEDB, plus m inor bug fix revision to DCS. The official release thread has been updated.

DB scripts for Channel Circus are available at the usual place.

Cheers,
4S

Re: SEDB70 update scripts

Posted: Thu 24 Apr 2014 8:38 am
by IV/JG7_4Shades
In a revision of the army unit naming methods I have added a new table to the database, called Army_Structure. An SQL script to add this table to an SEDB database is available here. This new table contains naming conventions for major army organizational units for all supported nations. See http://seowhq.net/seowwiki-en/index.php ... Unit_Types for more information.

The Army_Structure table must be in place for MP v7.0.28 (and later) and DCS v7.0.10 (and later) to work properly.

Re: SEDB70 update scripts

Posted: Thu 24 Apr 2014 1:50 pm
by Riksen
Amazing Shades!

Thank u all for ur work. Now completely up to date here. Perfect!!!!

Re: SEDB70 update scripts

Posted: Thu 24 Apr 2014 6:35 pm
by Riksen
Another issue for me right now....

After the update of MP4Public I'm getting this message every time I try to choose a sector in any map ..

Image

I checked the lines in the file and here is what i found (Line 1752 to 1758):

if ($rsGOOB->EOF) {
$strGOOB="";
}
else {
$strGOOB = addslashes(php_getstring($rsGOOB));
}
$rsGOOB->Close();


The message disapears if i replace it with the first version of MP4Public 7 but it doesnt load the sector. Im running an old version of Wampserver (2.0) could that be it?

Re: SEDB70 update scripts

Posted: Thu 24 Apr 2014 7:45 pm
by IV/JG7_4Shades
Sorry guys, I forgot that the Army_Units table needs a new field as well.

Code: Select all

#Required for DCS 7.0.10 and MP4public v7.0.28
ALTER TABLE Army_Units ADD COLUMN Organization_Level VARCHAR(256);
UPDATE Army_Units SET Organization_Level = "Division";
Cheers,
4S
All times are UTC-04:00
Page 1 of 2

Powered by phpBB® Forum Software © phpBB Limited