is anyone building the peal harbour map for use in SE ????
Mel
Pearl Harb
Moderator: SEOW Developers
-
III/JG11_Mel
- Posts: 17
- Joined: Tue 09 Jan 2007 7:22 pm
- Location: Perth Western Australia
-
IV/JG7_4Shades
- Posts: 2211
- Joined: Mon 08 Jan 2007 11:10 pm
- Location: Perth, Western Australia
-
III/JG11_Mel
- Posts: 17
- Joined: Tue 09 Jan 2007 7:22 pm
- Location: Perth Western Australia
-
II/JG77Hawk_5
- Posts: 162
- Joined: Wed 10 Jan 2007 1:13 am
- Location: Sydney, Australia
Looks like I have a new map to work on unless someone is already working on it.
Ok Mel,
What would help is areas of interest ie grid positions where you would like to see 3D detail views.
Yes, the island and airbases are a given along with a larger view of overall harbour so ships can be maneuvered and positioned with accuracy.
Are there any expected areas for land invasion etc that will require detailed view also?
I have found that the map creation process needs careful consideration on how battles will be fought and the detail in how planning unit movements can be achieved and where.
Input from people who are going to campaign on the map is hugely helpful in getting a good result.
Look forward to any input you can give me.
Hawk_5
Ok Mel,
What would help is areas of interest ie grid positions where you would like to see 3D detail views.
Yes, the island and airbases are a given along with a larger view of overall harbour so ships can be maneuvered and positioned with accuracy.
Are there any expected areas for land invasion etc that will require detailed view also?
I have found that the map creation process needs careful consideration on how battles will be fought and the detail in how planning unit movements can be achieved and where.
Input from people who are going to campaign on the map is hugely helpful in getting a good result.
Look forward to any input you can give me.
Hawk_5
-
VT-51_Thud
- Posts: 142
- Joined: Sun 21 Jan 2007 10:20 am
- Location: Virginia, USA
- Contact:
Roger! I will get a message out to our key planners to give you some input.II/JG77Hawk_5 wrote:I have found that the map creation process needs careful consideration on how battles will be fought and the detail in how planning unit movements can be achieved and where.
Input from people who are going to campaign on the map is hugely helpful in getting a good result.
Thank you.
-
VT-51_Flatspin
- Posts: 2
- Joined: Wed 10 Jan 2007 2:20 am
- Location: Utica, MI USA
-
III/JG11_Mel
- Posts: 17
- Joined: Tue 09 Jan 2007 7:22 pm
- Location: Perth Western Australia
hawk-5
Thanks mate, we will be looking at invading and defending the main island and the same for the big western island etc, we will be using airborne and sea invasion techniques with the ability to build temp air fields on land etc.
To start with it will be a carrier fleet v carrier fleet etc with objectives on land etc. EG factory destruction tied to speed and range of ships etc.
Appreciate your help mate, I know Tige is a good hand with some of this stuff but I dont have a clue.
If I can help with anything let me know.
Thanks again.
Mel
Thanks mate, we will be looking at invading and defending the main island and the same for the big western island etc, we will be using airborne and sea invasion techniques with the ability to build temp air fields on land etc.
To start with it will be a carrier fleet v carrier fleet etc with objectives on land etc. EG factory destruction tied to speed and range of ships etc.
Appreciate your help mate, I know Tige is a good hand with some of this stuff but I dont have a clue.
If I can help with anything let me know.
Thanks again.
Mel
-
II/JG7_Warg
- Posts: 37
- Joined: Fri 12 Jan 2007 5:31 am
Hi there,
The road and airbase coordinates were done over the Christmas break and as always, Hawk5 and 4Shades are on it. Incidentally, also have an old SE template for this (not published), though an based on the actual attack on the morning of December 7th, 1941. Might save you some time or a point of reference to work from. Your welcome to it, though I'd probably need to review the accompanying template notes.
Regards, Warg
The road and airbase coordinates were done over the Christmas break and as always, Hawk5 and 4Shades are on it. Incidentally, also have an old SE template for this (not published), though an based on the actual attack on the morning of December 7th, 1941. Might save you some time or a point of reference to work from. Your welcome to it, though I'd probably need to review the accompanying template notes.
Regards, Warg
-
III/JG11_Mel
- Posts: 17
- Joined: Tue 09 Jan 2007 7:22 pm
- Location: Perth Western Australia
-
II/JG77Hawk_5
- Posts: 162
- Joined: Wed 10 Jan 2007 1:13 am
- Location: Sydney, Australia
Work has begun on the map but Flatspin has raised a good point about the frame rate issue.
A fully loaded template may indeed cause a heavy slowdown around the harbour and rest of the map.
By all means, build a test co-op with a reasonable object load on the map, moving ships (carrier task forces) and moving land forces etc so you can set template limits earlier rather than later ie. when your ready to kickoff campaign. This then published would be a good guide for other users thinking of doing a Pearl scenario some time in the future.
Starting point?
a mission with the following units moving to use as a load test. Add a variety of static units as well.
10 ships (eg: 1 carrier, 4 destroyer escort per group)
20 platoons (10 platoon ground movements per side)
40 aircraft
Thanks,
Hawk_5
A fully loaded template may indeed cause a heavy slowdown around the harbour and rest of the map.
By all means, build a test co-op with a reasonable object load on the map, moving ships (carrier task forces) and moving land forces etc so you can set template limits earlier rather than later ie. when your ready to kickoff campaign. This then published would be a good guide for other users thinking of doing a Pearl scenario some time in the future.
Starting point?
a mission with the following units moving to use as a load test. Add a variety of static units as well.
10 ships (eg: 1 carrier, 4 destroyer escort per group)
20 platoons (10 platoon ground movements per side)
40 aircraft
Thanks,
Hawk_5
-
II/JG7_Warg
- Posts: 37
- Joined: Fri 12 Jan 2007 5:31 am
Hi there,
I'll send the template over to you Mel (not sure if you have it already). The ships at Pearl (about 50+) are in their historic positions, all stationery and fire rate set at 99.00. Apart from AAA at airfields, nothing else added to map. Reckon, it'd be a good idea to leave the ships as is, to keep down frame rates and give the attackers a decent chance. All aircraft are loaded at the bases and onto carriers at historic distributions and strengths. No reinforcements to add. Default skins are OK. Don't have any notes for this template, but can probably make something for aircraft type name changes and special rules. e.g. unarmed B-17's inbound from the mainland, etc, etc. From memory (about a year or two ago), I've placed the Japanese Strike Force (Kido Butai) at about half the actual distance from Hawaii. The force itself was six fleet carriers, two battleships, two light cruisers and nine destroyers in the formation set out.
Pearl Harbour is well documented and there are endless possibilities, since you mentioned the Japanese in following up with a land invasion. Of course that would mean transports, battleships, cruisers and possible light carrier (Hosho?) out further west on the map. Therefore additional American forces. The carrier Enterprise, with three crusiers, nine destroyers were on the way back from Wake (from south-west to Hawaii). Some of her Dauntlesses flew into the attack. The carrier Lexington sailed on the 5th to Midway, with three cruisers and five destroyers. (To the north-west of Hawaii) and the Heavy Crusier Indianapolis and five destroyers, south at Johnston Island. Closer still was the cruiser Minneapolis and four destroyers on gunnery exercise just south of Oahu.
But to do all this, I'm guessing you'll need a Kray supercomputer to run the thing. Anyway I'll send the template for your people to thrash through.
Regards, Warg
I'll send the template over to you Mel (not sure if you have it already). The ships at Pearl (about 50+) are in their historic positions, all stationery and fire rate set at 99.00. Apart from AAA at airfields, nothing else added to map. Reckon, it'd be a good idea to leave the ships as is, to keep down frame rates and give the attackers a decent chance. All aircraft are loaded at the bases and onto carriers at historic distributions and strengths. No reinforcements to add. Default skins are OK. Don't have any notes for this template, but can probably make something for aircraft type name changes and special rules. e.g. unarmed B-17's inbound from the mainland, etc, etc. From memory (about a year or two ago), I've placed the Japanese Strike Force (Kido Butai) at about half the actual distance from Hawaii. The force itself was six fleet carriers, two battleships, two light cruisers and nine destroyers in the formation set out.
Pearl Harbour is well documented and there are endless possibilities, since you mentioned the Japanese in following up with a land invasion. Of course that would mean transports, battleships, cruisers and possible light carrier (Hosho?) out further west on the map. Therefore additional American forces. The carrier Enterprise, with three crusiers, nine destroyers were on the way back from Wake (from south-west to Hawaii). Some of her Dauntlesses flew into the attack. The carrier Lexington sailed on the 5th to Midway, with three cruisers and five destroyers. (To the north-west of Hawaii) and the Heavy Crusier Indianapolis and five destroyers, south at Johnston Island. Closer still was the cruiser Minneapolis and four destroyers on gunnery exercise just south of Oahu.
But to do all this, I'm guessing you'll need a Kray supercomputer to run the thing. Anyway I'll send the template for your people to thrash through.
Regards, Warg
-
III/JG11_Mel
- Posts: 17
- Joined: Tue 09 Jan 2007 7:22 pm
- Location: Perth Western Australia
Thanks guys
Once we have the map inside the SE environment we can evaluate factories and ground stuff etc. We are in the process of discussing what scenario we will start with so we will be able to set the limits and test them etc once we are over this stage.
In the meantime I will have a look at your template Warg and run it and stress test with the AG51 lads to see if there will be a problem.
We almost have it down pat what to use to keep frame rates down due to the testing we did with the Guadal canal map, which we could never get to run by the way. But that's another story.
We appreciate the help guys and once we have it sorted we will make it available as a template etc for all to use.
Cheers
Mel
Once we have the map inside the SE environment we can evaluate factories and ground stuff etc. We are in the process of discussing what scenario we will start with so we will be able to set the limits and test them etc once we are over this stage.
In the meantime I will have a look at your template Warg and run it and stress test with the AG51 lads to see if there will be a problem.
We almost have it down pat what to use to keep frame rates down due to the testing we did with the Guadal canal map, which we could never get to run by the way. But that's another story.
We appreciate the help guys and once we have it sorted we will make it available as a template etc for all to use.
Cheers
Mel
-
II/JG7_Warg
- Posts: 37
- Joined: Fri 12 Jan 2007 5:31 am
No problems Mel. Am curious on the reason why the Guadalcanal map is unusable. Made a Coral Sea template, using it awhile back and it was mostly ocean. Guess it has to be numbers of moving ships and firing rates. On that matter, you have a reasonable argument to set US ships to no fire at all for the opening Pearl Harbour missions. Did you ever get the SE missions to run to the full two hours by the way? Just finished a template for the Marianas 41 map and interested in this. On the Pokorova map, have found that limiting the number of orders issued to ground units also helps with frame rates.
Warg
Warg
-
III/JG11_Mel
- Posts: 17
- Joined: Tue 09 Jan 2007 7:22 pm
- Location: Perth Western Australia
Yo Warg
No- no matter what we did we could not get past the 40-60 min mark. Didn't matter what we did including having no ground units and min naval units.
We are looking at using the Marianas map for a mini campaign till the Pearl map is incorporated into SE. Any idea when this will be guys -- just a general idea would help us greatly at the moment.
\mel
No- no matter what we did we could not get past the 40-60 min mark. Didn't matter what we did including having no ground units and min naval units.
We are looking at using the Marianas map for a mini campaign till the Pearl map is incorporated into SE. Any idea when this will be guys -- just a general idea would help us greatly at the moment.
\mel