Bug Reports: SEDB33A, MP4 v4.756, SEDCS v3.3.0

Post by **IV/JG7_4Shades** » Sun 17 Apr 2011 1:21 am

Please post here any bug reports for this SEOW release.

Remember, you MUST have .NET Framework 4.0 to use the new DCS.

Cheers,
4Shades

JG26_Badger · Post by **JG26_Badger** » Sun 17 Apr 2011 4:21 am

S~4 shades:

I put in Microsoft Net Framework 4.0 as you instructed. Now my SEOW DCS 3.2.22 does not work anymore.

Here is the error I am getting Microsoft.Net Framework and the details from the errror message.
"Unhandled exception has occurred in your application>. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit. the application will close immediately

The type initializer for SEDCS.modDB' threw an exception"

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.TypeInitializationException: The type initializer for 'SEDCS.modDB' threw an exception. ---> System.BadImageFormatException: Could not load file or assembly 'Interop.ADODB, Version=2.8.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded.
File name: 'Interop.ADODB, Version=2.8.0.0, Culture=neutral, PublicKeyToken=null'
at SEDCS.modDB..cctor()

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

--- End of inner exception stack trace ---
at SEDCS.modDB.CloseDBConnection()
at SEDCS.basErr.checkDbConnect(Int32 item, Boolean addingError)
at SEDCS.basErr.checkError(Int32 item, Int32 whatError)
at SEDCS.basErr.SearchIfThereAreErrorsAndPostMessage(Int32 item, Boolean postMessageOnForm, String& str)
at SEDCS.frmMain.AddAndBuildDatabaseItem(Int32 item)
at SEDCS.frmMain.treeViewInitList()
at SEDCS.frmMain.frmMain_Load(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3620 (GDR.050727-3600)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
SEOW-DCS-V3.2.22
Assembly Version: 3.2.12.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/Scorched%20Earth%20Online%20War%20System/SEOW-DCS-V3.2.22.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3614 (GDR.050727-3600)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3082 (QFE.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------

This means I can't build or analyze any of my current campaigns. I have reinstalled and unistalled Netframework 4.0 and still have the same problem. No problem prior to installing the Net framework 4.0

I was trying to get ready for the new release but now stuck. Help please.

Thanks

JG26_Badger

22GCT_Gross · Post by **22GCT_Gross** » Sun 17 Apr 2011 8:04 am

Cannot find the SEPIA images series into the Uniticons folder.
PS
And identical error as above (windows2008 server 64x, framework 4 32&64)
I did not install anything as I trust to be ready
C:\Windows\Microsoft.NET\Framework\v4.0.30319
C:\Windows\Microsoft.NET\Framework64\v4.0.30319

Post by **IV/JG7_4Shades** » Sun 17 Apr 2011 8:41 am

Hi Badger,

Yes it seems that .NET 4.0 is not backwards-compatible with 2.0. I guess there are some choices to be made:

*) Install .Net 4.0 and migrate your MP4public and all your campaigns to SEDB33A.

OR

*) Stay with the old SEOW until you are ready.

You should be able to uninstall .NET 4.0, and then hopefully SEDCS 3.2.22 will work again.

Cheers,
4Shades

JG26_Badger · Post by **JG26_Badger** » Sun 17 Apr 2011 11:37 am

S~:

Ok here is an update for the previously stated problem, this is what I found after a long night of blury eyed debugging.

As previously stated I did all the update procedures to convert to the new database and new DCS, new MP, and by adding Net Framework 4.0. Then when I tried my old DCS 3.2.22 I kept getting the Windows Net Framework errors an not able to connect to mysql.

I have found that if you have you have multiple campaigns using the older version of the SEDCS and you want to install this latest greatest 4Shades release you need to do the following to get them to work properly (at least it works now on my system).

The SEDCS creates a path for the installation by default on my computer it was C:\Program Files\Scorched Earth Online War System
then it will put in about 9 files into that folder. Now if you want to run different or older versions of the SEDCS you need to create a seperate folder for your different versions of the DCS, so I created a folder called SEDCS 3.30 so my path is C:\Program Files\Scorched Earth Online War System\SEDCS 3.3.0 Now my 9 files for the newest version of the DCS are in this folder.

My older version DCS 3.22.2 has a seperate folder the path is C:\Program Files\Scorched Earth Online War System\SEDCS 3.2.22 This worked for me and no more errors when using the DCS.

Like I said it worked for me, hope this might be helpful to others.

S~
JG26_Badger

22GCT_Gross · Post by **22GCT_Gross** » Sun 17 Apr 2011 1:22 pm

I assume the Sedcs 3.3.0 is not working yet for you. (so it's for me)

22GCT_Gross · Post by **22GCT_Gross** » Sun 17 Apr 2011 1:49 pm

Industrial areas:
how can we assign the different Factory_District objects in the database to the various places?
(Factory_District_Large, Factory_District_Medium, Factory_District_Small)

----

interop.ADODB - some discussions
http://forums.esri.com/Thread.asp?c=93&f=993&t=270722
http://community.entityspaces.net/forums/t/3331.aspx
http://www.vbforums.com/archive/index.php/t-355701.html
http://www.vbforums.com/archive/index.php/t-448965.html

I noticed My framework 4.0 services are not running
Click here to dowload; run under TeamViewer->Extra>Play registered session

Post by **IV/JG7_4Shades** » Sun 17 Apr 2011 7:44 pm

Hi Gross,

Have a look at http://wiki-seow-en.swil.fr/index.php/F ... forcements for information on new factory objects. Basically you just define new types of installations in the Industrial_Installations table.

If your SEPIA images for the MP have not downloaded, you should be able to grab them either from the CVS tree or from the new MP patch file.

Cheers,
4Shades

=gRiJ=Petr · Post by **=gRiJ=Petr** » Mon 18 Apr 2011 9:08 pm

Hi Shades,

First thanks for the hard work and the new version!

I'm trying to merge 2 templates through the merger tool through the new planner.

I can use and select all the necessary files and info for all the fields except the date of the first mission. I cannot enter numbers or copy paste the numbers from notepad.

There is also no mention of which format the date needs to be which could be confusing for us Europeans.

Thanks as always!
Cheers
Petr

Post by **IV/JG7_4Shades** » Mon 18 Apr 2011 9:30 pm

Hi Petr,

That date field is a Javascript program and should work on MP-compliant browsers. I wonder whether you have got the required Javascript library when installed ... I will check tonight whether the library was in the update patch.

Cheers,
4Shades

=gRiJ=Petr · Post by **=gRiJ=Petr** » Tue 19 Apr 2011 3:54 am

Hi Shades,

Thanks!

Cheers,
Petr

Post by **IV/JG7_4Shades** » Tue 19 Apr 2011 8:27 am

Hi Petr,

The javascript datepicker code is definitely inside the MP4public patch zip file. Make sure you have a "jsdp" folder inside your "Merger" folder. It should contain 14 html, css and js files, plus an img folder and a CVS folder.

EDIT: Oops, forget what I said, the datepicker code is missing from the patch file. I will make a new patch file.

Cheers,
4Shades

Post by **IV/JG7_4Shades** » Tue 19 Apr 2011 10:07 am

Please download and apply the MP4public patch to "v4.756A". THis contains better Merger and StalingradWInter support.

Cheers,
4Shades

=gRiJ=Petr · Post by **=gRiJ=Petr** » Tue 19 Apr 2011 11:23 am

Brilliant Shades!
Will advise when cmirko updates the 102nd server!

Cheers,
Petr

=gRiJ=Petr · Post by **=gRiJ=Petr** » Tue 19 Apr 2011 12:51 pm

Patch applied and the tool for selecting the date is now usable!

However, another problem

I have both templates to be merged on my local machine. Using the 102nd server to merge.
when I selct the blue template first, red second, the blue units are correct in the mis file. The red seems to be missing coordinates for flak guns like the bofors.

I will send you the 2 templates and the merge result in an email.

Cheers!
Petr

Official SEOW

An Open Source community for historical flight simulation.

Bug Reports: SEDB33A, MP4 v4.756, SEDCS v3.3.0

Bug Reports: SEDB33A, MP4 v4.756, SEDCS v3.3.0

Errors with Microsoft Net Framework 4.0 and DCS 3.2.22