Parkers Crossroads is a Scorched Earth Online Campaign for IL2 1946 , modded to the standards of HSFX 7.03.
The campaign will take place in the Ardennes of Belgium , December 22-23rd 1944.
Download the Skin File from Dropbox , in the thread here in Kopfdorfer's Den.
In your JSGME , enable 1) HFX History Mod
2) Expert Mode
3) Hakenkreuz
Prepare for some tough flying in poor weather.
Review your beacon , blind landing , and radio direction finding procedures , especially navigation by YG (if Allied).
Kopfdorfer
Parkers Crossroads Participants Technical Requirements
-
- Posts: 161
- Joined: Fri May 31, 2013 9:19 pm
- Location: Dartmouth , Nova Scotia, Canada
-
- Posts: 200
- Joined: Thu Feb 07, 2013 11:19 am
- Location: France
Re: Parkers Crossroads Participants Technical Requirements
Hi kopf, could you separate the recon planes in separate units, i can't send both of them at the same time, and it will freeze the second plane while the first one is refueling.
Another issue is that i can't plan supply flight , the MP indicate that i have reached the limit. though no supply flight have been planned. Am i doing something wrong ?
Another issue is that i can't plan supply flight , the MP indicate that i have reached the limit. though no supply flight have been planned. Am i doing something wrong ?
"Il n'est pas besoin d’espérer pour entreprendre, ni de réussir pour persévérer" Guillaume d'Orange
-
- Posts: 79
- Joined: Wed Nov 11, 2009 2:47 am
- Location: Montgomery, AL (USA)
Re: Parkers Crossroads Participants Technical Requirements
I usually place both transport planes and recon planes in squadrons of one but it is not a problem GreyKitten. All you need do is use the option to select only one plane from the flight. The other plane is there for use so you do not lose the squadron name.
S~
Badger
S~
Badger
-
- Posts: 2029
- Joined: Sat Jan 26, 2008 3:07 am
- Location: Perth, Western Australia
Re: Parkers Crossroads Participants Technical Requirements
There were a couple of issues here:
1. Kopfdorfer had already used up the supply drop limit in setting up the campaign - he has fixed this now.
2. With supply flights of strength = 3, if you load freight onto the flight, it will be distributed equally among the planes. Then when you send a single plane out to drop supply, it will only carry 1/3 of its max capacity. This is because the code has not been written to support transport units with strength > 1. Kopfdorfer will probably split the relevant transport flights.
Cheers,
4S
1. Kopfdorfer had already used up the supply drop limit in setting up the campaign - he has fixed this now.
2. With supply flights of strength = 3, if you load freight onto the flight, it will be distributed equally among the planes. Then when you send a single plane out to drop supply, it will only carry 1/3 of its max capacity. This is because the code has not been written to support transport units with strength > 1. Kopfdorfer will probably split the relevant transport flights.
Cheers,
4S
IV/JG7_4Shades
SEOW Developer
SEOW Developer